—23—
THE CURING ROOM.
It is just as easy to have a model curing room as one that is defective in structure. A cheese may be turned out of the hoop the acme of perfection in every detail of manufacture, and yet subsequently be damaged partly or wholly ruined by inhabiting a faulty curing apartment. The curing room should not be in a loft, or above the make-room. It should be on the ground floor, and for convenience it should open direct from the make-room, the door being easy of access to the press. The partition between the two rooms must be impervious to the steam arising from the cheese vats, as the animal vapor is detrimental to the maturing product on the shelves. The room should by all means be plastered, and have windows that can be lowered from the top when necessary for proper ventilation. In these times when cheese are frequently shipped when only ten days from the hoop, a large curing room is not necessary even for a large factory. The smaller you can have it without crowding, the better. If you want a room that will hold 300 cheese, lay shelves 2½ feet above the floor that will accommodate 100, put in stout uprights 7½ feet high, and on cross pieces above lay two more tiers of shelves of the same surface capacity as the bottom counter. When it is finished you have three tiers of shelves encircling the room, save for two doors, with space left in the center for a box stove. The object of arranging shelves one above another is not so much to utilize space as it is to scientifically cure the product. It, however, answers for both purposes. In a room, temperature rises with height, and the atmosphere is, of course, several degrees warmer near the ceiling than in the region of the floor. Hang a reliable thermometer on a range with the second tier of shelves, in a portion of the room where it will not be affected by direct heat from the
