Hold it to the rope with the thumb of your left hand while you wind the standing part around it and the rope until the
 | An image should appear at this position in the text. To use the entire page scan as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|Handbook for Boys.djvu/70}}". Otherwise, if you are able to provide the image then please do so. For guidance, see Wikisource:Image guidelines and Help:Adding images. |  |
end of the twine has been covered. Then with the other end of the twine lay a loop back on the end of the rope and continue winding the twine upon this second end until all is taken up. The end is then pulled back tight and cut off close to the rope.
| An image should appear at this position in the text. To use the entire page scan as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|Handbook for Boys.djvu/70}}". Otherwise, if you are able to provide the image then please do so. For guidance, see Wikisource:Image guidelines and Help:Adding images. | |
For the sake of clearness a scout must constantly keep in mind these three principal parts of the rope:
1. The Standing Part—The long unused portion of the rope on which he works;
2. The Bight—The loop formed whenever the rope is turned back upon itself; and,
3. The End—The part he uses in leading. Before proceeding with the tenderfoot requirements, a scout should first learn the two primary knots: the overhand and figure-of-eight knots.
| An image should appear at this position in the text. To use the entire page scan as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|Handbook for Boys.djvu/70}}". Otherwise, if you are able to provide the image then please do so. For guidance, see Wikisource:Image guidelines and Help:Adding images. | |
The Overhand Knot. Start with the position shown in the preceding diagram. Back the end around the standing part and up through the bight and draw tight.
The Figure of Eight Knot. Make a bight as before. Then lead the end around back of the standing part and down through the bight.
After these preliminary steps, the prospective tenderfoot may proceed to learn the required knots.
