Page:Home labor saving devices (1917).djvu/124

From Wikisource
Jump to navigation Jump to search
This page needs to be proofread.

BUTTER WORKER

A very useful appliance, and easily operated, making the butter into a close-grained mass without injuring the texture of it. It is made of poplar, triangular in shape, with a corrugated roller. This roller fits in a hole made in a piece of metal which is put across the smaller end of the worker. This worker may be operated by putting it on the kitchen table, or it may be placed on adjustable legs.


Materials:

13' maple for bottom, sides, and battens.
3' 1-3/8" × 2" × 5" for roller.
10 No. 14 screws, 3" to fasten the sides on bottom.
8 No. 14 screws, 3" to fasten battens on bottom.
1 piece 28-gauge zinc 4-3/4" wide × 16" long, for front piece.
8 four-penny box nails to fasten zinc across the front.
1 pan 2" deep × 12" wide × 14" long, to place under worker in small end to catch drippings from butter.
Wood glue to fasten handle on roller.

Dimensions:

Bottom: 1 piece 1-1/4" thick × 30" wide in front, 4" wide in back × 26" long.

Sides: 2 pieces 1-1/4" thick × 6" wide, × 30" long.

Battens: 1 piece 1-1/4" thick × 4" wide × 30" long.

1 piece 1/4" thick × 2" wide × 2" long.

Roller: 1 piece 4" thick × 4" wide × 36" long.

Handle: 1 piece 5" long.