Page:Machine-gun tactics (IA machineguntactic00appl).pdf/268

From Wikisource
Jump to navigation Jump to search
This page needs to be proofread.

The cartridges are mounted on a strip of sheet brass from which clips are punched and bent round the cartridges to hold them in position. A series of holes along the edges of the brass strap engage the teeth of pinions which feed the strip forward as the piston A moves backward and forward. The cartridges are fired from their clips by fingers, and drop into position when the bolt is withdrawn. Thirty cartridges are mounted on one strip, which is fed into the slot s, from the left side. The trigger must be kept down by pressure all the time, otherwise the spring o cannot operate to return the block forward. The gun is provided with a shoulder piece and gunner's seat, as shown. The gun alone weighs about 73 lb., and with tripod 115 lb. It is sighted to 2,000 metres. The gun is stated to work very satisfactorily, and, owing to the positive motions, jamming does not occur easily.

Organisation.—At the close of the war each of the two cavalry brigades was equipped with 6 machine guns and each infantry regiment with 3 guns, and it was contemplated to increase the allowance to 6 guns for each regiment, infantry or cavalry. The guns are served by infantrymen who are extra-regimental and selected from men having mechanical knowledge.

Guns are organised as follows:

Infantry.—Batteries of 6 guns, each subdivided into 3 sections; each infantry regiment