Page:Motors and motor-driving (1902).djvu/138

From Wikisource
Jump to navigation Jump to search
This page has been proofread, but needs to be validated.
106
MOTORS AND MOTOR-DRIVING

at the bottom, b. The piston p is connected by the connecting rod c to the crank cr by means of which it turns the flywheel f.

Compared with the propulsion of the front wheel of the old high-wheeled bicycle, the connecting-rod (c) represents the rider's leg, the crank (cr) the crank of the bicycle, and the flywheel (f) the large wheel of the bicycle.

The force which drives the piston downward, and so operates the fly-wheel f, is generated by the explosion of a mixture of gas and air in the combustion chamber t. This mixture reaches the combustion chamber through the induction pipe i p, and the induction or inlet valve i. It is fired by an electric spark occurring in the combustion chamber, or a red-hot platinum tube protruding into same, and the exploded charge is ejected through the exhaust valve e, as will be hereafter explained.


THE SUCTION STROKE

Let it be supposed that the fly-wheel has been set rapidly revolving, that the piston has been up at the top at t, and has just descended to the bottom of its stroke (b). In doing this it sucks down the valve i (called the inlet or induction valve), which is otherwise held closed by a spring, and thus draws through the valve from the induction pipe (ip) a mixture of vapour of petrol and air.

When the piston is at the bottom (b) the cylinder is fully charged with this explosive mixture.

The suction having stopped, the inlet valve is closed by its spring, and the cylinder is then air- or rather gas-tight.


THE COMPRESSION STROKE

The momentum of the fly-wheel then thrusts the piston up to the top (t) again, and in doing so, as there is no escape, the explosive mixture which had previously filled all the space in the cylinder between its head (h) and b is compressed into the very small space remaining between h and t.