furnace, consists of two gases[1]; about one-fifth being oxygen, and four-fifths azote.
According to the present state of chemical knowlege, the oxygen alone is effective in producing heat; and the operation of blowing a furnace may be thus analyzed.
1. The air is forced into the furnace in a condensed state, and, immediately expanding, abstracts heat from the surrounding bodies.
2. Being itself of moderate temperature, it would, even without expansion, still require heat to raise it to the temperature of the hot substances to which it is to be applied.
3. On coming into contact with the ignited substances in the furnace, the oxygen unites with them, parting at the same moment with a large portion of its latent heat, and forming compounds which have less specific heat than their separate constituents. Some of these pass up the chimney in a gaseous state, whilst others remain in the form of melted slags, floating on the surface of the iron, which is fused by the heat thus set at liberty.
4. The effects of the azote are precisely similar to the first and second of those above described; it seems to form no combinations, and contributes nothing, in any stage, to augment the heat.
The plan, therefore, of heating the air before driving it into the furnace saves, obviously, the whole of that heat which the fuel must have supplied in raising it from the temperature of the external air up to that of 600° Fahrenheit; thus rendering the fire more in-
- ↑ The accurate proportions are, by measure, oxygen 21, azote 79.
