APPARATUS AND METHODS
��e, and therefore this can be calculated in terms of e (the electromotive force of the standard element).
In practice, the resistance of a b must be fairly large. It generally consists of a board fitted with 21 metallic pins which may be connected above with a circuit and which are
��A( f
�> B
�took
�so*
�30%
�70%
�60%
�%JOO
�SO*
�+0*
�30%
�20%
�/o% a
�v"
��or of 100 ohms, as indicated in fig. 43. The two pins marked are connected by a thick copper wire.
This total resistance of 1,000 ohms, as well as the element e, as shown in fig. 44. r is so modified that a Between the pins and there is no difference of potential,
��1 In order to do this a branch circuit containing an electrometer and a standard 1 volt cell is inserted between a and b, and the
�� �