Page:Philosophical Transactions - Volume 037.djvu/11

From Wikisource
Jump to navigation Jump to search
This page has been proofread, but needs to be validated.

(6)

Diameter, having Notches, or Teeth, to take hold of the Leaves of a Pinion of cast Iron Q, 10 Inches Diameter, with eight Teeth in it moving on an Axis. The other loose End of this Chain has a large Weight hanging at it, to help to counterpoise the Wheel, and preserve the Chain from sliding on the Pinion. On the same Axis is fixed a Cog-Wheel R, 6 Feet Diameter, with 48 Cogs. To this is applied a Trundle, or Pinion, S, of fix Rounds, or Teeth; and upon the same Axis is fixed T, a Cog-Wheel of 51 Cogs, into which the Trundle V, of six Rounds, works; on whose Axis is a Winch, or Windlass, W, by which one Man, with the two Windlasses, raises or lets down the Wheel as there is Occasion.

And because the Fulcra of these Levers, M N, are in the Axis of the Trundle K, viz, at M or X, in what Situation soever the Wheel is raised or let down, the Cog-Wheel II, is always equidistant from M, and works, or geers truly.

By Means of this Machine the Strength of an ordinary Man will raise about fifty Ton Weight.

I, I, is a Cog-Wheel fixed near the End of the great Axis, 8 Feet Diameter, and 44 Cogs working into a Trundle K, of 41/2 Foot Diameter, and 20 Rounds, whose Axis or Spindle is of Cast Iron 4 Inches in Diameter, lying in Brasses at each End, as at X.

Z Z is a quadruple Crank of Cast Iron, the Metal being 6 Inches square, each of the Necks being turned one Foot from the Center, which is fixed in Brasses at each End in two Head-stocks fastned down by Caps. One End of this Crank at Y is placed close abutting to the End of the Axle-tree X, where they are at those Ends

fix