Page:Popular Science Monthly Volume 14.djvu/152

From Wikisource
Jump to navigation Jump to search
This page has been validated.
140
THE POPULAR SCIENCE MONTHLY.

in the length of the rod changes the pressure upon the carbon, and alters the resistance of the circuit. This causes a deflection of the galvanometer-needle—a movement in one direction denoting expansion of A, while an opposite motion signifies contraction. To avoid any deflection which might arise from change in strength of battery, the tasimeter is inserted in an arm of the Wheatstone's bridge.

Fig. 33.

In order to ascertain the exact amount of expansion in decimals of an inch, the screw S, seen in front of the dial, is turned until the deflection previously caused by the change of temperature is reproduced. The screw works a second screw, causing the rod to ascend or descend, and the exact distance through which the rod moves is indicated by the needle, N, on the dial. The instrument can also be advantageously used to measure changes in the humidity of the atmosphere.

In this case the strip of vulcanite is replaced by one of gelatine, which changes its volume by absorbing moisture.

The Arephone.—The arephone, an invention of Mr. Edison's, for amplifying sound, has already attracted considerable attention, though as yet it has not been perfected.

Its object is to increase the loudness of spoken words, without impairing the distinctness of the articulation.

The working of the instrument is as follows: The magnified sound proceeds from a large diaphragm, which is vibrated by steam or condensed air. The source of power is controlled by the motion of a second diaphragm, vibrating under the influence of the sound to be magnified.

There are three distinct parts to the instrument:

A source of power—compressed air.

An instrument to control the power.

A diaphragm vibrating under the influence of the power.

The first of these is usually compressed air, supplied from a tank. It is necessary that it should be of constant pressure.

The second, shown in section at Fig. 34, consists of a diaphragm and mouth-piece, like those used in the telephone. A hollow cylinder is attached by a rod to the centre of the diaphragm. The cylinder, and its chamber, E, will therefore vibrate with the diaphragm.