that the current, which starts with an infinitesimal strength, soon rises to the maximum capacity of the machine.
The motor shown in Fig. 10 does not in any way resemble an electric railway motor, nevertheless the principle of action is precisely the same in both. The design of a machine of any kind has to conform to the practical requirements, and this is true of railway motors, just as it is true of printing presses, sawmills, or any other mechanism. A railway motor must be designed to run at
Fig. 15.—External View of Electric Railway Motor mounted upon Car-Wheel Axle.
a comparatively slow speed and to develop a strong rotative force, or torque, as it is technically called. It must also be so constructed that it will not be injured if covered with mud and water. It must be compact, strong, and light, and capable of withstanding a severe strain without giving out. To render the machine water-and mud proof it is formed with an outer iron shell, which entirely incases the internal parts. The first railway motors were not inclosed, and the result was that they frequently came to grief from the effects of a shower of mud. When the modern inclosed type of motor, which is called the iron-clad type, first made its appearance it was frequently spoken of as the clam-shell type, and the name is not altogether inappropriate, for while the outside may be covered with mud to such an extent as to entirely obliterate the design, the interior will remain perfectly clean and dry, and therefore its effectiveness will not be impaired.
To enable the motor to give a strong torque and run at a slow speed the number of poles in the field and armature is increased. The design of Fig. 10 has two poles in the field and two in the armature, and is what is known as the bipolar type. Machines having more than two poles in each part are called multipolar machines. The number of poles can be increased by pairs, but not by a single pole—that is, we can have four, six, eight, or any other even number of poles', but not five, seven, or any odd number. This is owing to the fact that there must always be
