Page:Project Mercury - A Chronology.pdf/37

From Wikisource
Jump to navigation Jump to search
This page has been proofread, but needs to be validated.
20
Project Mercury: A Chronology

1958 (Cont.)

During the Month of April

Maxime A. Faget and associates conceived the idea of using a contour couch to withstand the high g-loads attendant to acceleration and reentry forces of manned space flight. Fabrication of test-model contour couches was started in the Langley shops in May 1958, and the concept was proved feasible on July 30 (see entry) of that same year.[1]

June 5

After serving as a liaison officer of NACA and as a participating member of an Advanced Research Projects Agency panel, Maxime A. Faget reported to Dr. Hugh Dryden on resulting studies and attending recommendations on the subject of manned space flight. He stated that the Advanced Research Projects Agency panel was quite aware that the responsibility for such a program might be placed with the soon-to-be-created civilian space agency, although they recommended program management be placed with the Air Force under executive control of NACA and the Advanced Research Projects Agency. The panel also recommended that the program start immediately even though the specific manager was, as yet, unassigned. Several of the proposals put forth by the panel on the proposed development were rather similar to the subsequent evolvement. The system suggested by the Advanced Research Projects Agency was to be based on the use of the Atlas launch vehicle with the Atlas-Sentry system serving as backup; retrorockets were to be used to initiate the return from orbit; the space- craft was to be a nonlifting, ballistic type, and the crew was to be selected from qualified volunteers in the Army, Navy, and Air Force.[2]

June 22

NACA personnel discussed the proposed space agency budget, including the manned satellite project, with Bureau of Budget officials.[3]

June 26

Meetings were held with NACA, AVCO, and Lockheed representatives in attendance to consider materials for thermal protection of satellite reentry vehicles.[4]

During the Month of June

Preliminary specifications of the first manned satellite vehicle were drafted by Langley Aeronautical Laboratory personnel under the supervision of Maxime Faget and Charles W. Mathews. After a number of revisions and

  1. Information supplied by Jack C. Heberlig, Engineering and Development, Manned Spacecraft Center, May 28, 1963.
  2. Memo, Maxime A. Faget to Dr. Dryden, Director, NACA, June 5, 1958.
  3. Memo, Warren J. North to NASA Administrator, subject: Background of Project Mercury Schedules, Aug. 14, 1960.
  4. Memo, H. M. Henneberry and G. C. Deutsch to Associate Director, NASA-Langley, subject: Discussions with AVCO and Lockheed Representatives Concerning Materials for Thermal Protection of Satellite Reentry Vehicles, Washington D.C., June 26-27, 1958, Sept. 8, 1958.