tive tissue-compound, I apply the sheet, sometimes of considerable length, to the surface of the tissue-compound contained in a trough, and kept fluid by means of heat, and I draw or raise the sheet or length of paper off the surface with a regular motion; and I sometimes apply more than one coating to the same sheet in this manner. After such coating, I place the coated paper where it will quickly dry, and seclude it from injurious light.
“The sensitive tissue, prepared as before described, is, when dry, ready to receive the photographic impression, by exposure under a negative in the usual manner, or by exposure in a camera obscura, to light transmitted through a negative in the manner usual in printing by means of a camera. I prefer to use the sensitive tissue within two days of the time of its preparation. Where the tissue is not required for immediate use, I omit the sensitizer from the tissue-compound as before mentioned; and with this non-sensitive tissue-compound, I coat paper, glass, or other surface, as described in the preparation of the sensitive tissue or paper. In preparing sheets of non-sensitive tissue by means of glass, as described, I use no preliminary coating of collodion. I dry the non-sensitive tissue in the same manner as the sensitive, except that in the case of the non-sensitive tissue, seclusion from daylight is not necessary.
“The non-sensitive tissue is made sensitive, when required for use, by floating the gelatinous surface upon a solution of the sensitizer, and the sensitizer that I prefer to use for this purpose is an aqueous solution of the bichromate of potash containing about two and a half per cent, of this salt. I apply the sensitizer (by floating or otherwise), to the gelatinous surface of the tissue; and after this, I place it in a suitable position for drying, and exclude it from injurious light.
“In applying to photographic printing the various modifications of the sensitive tissue, prepared as before described, I place the sensitive tissue on a negative in an ordinary photographic printing-frame, and expose to light in the manner usual in photographic printing; or I place it in a camera obscura in the manner usual in printing by means of a camera obscura. When the tissue employed is coated with a film of collodion on one side, I place the collodionized side in contact with the negative; or where it is used in the camera, I place the collodionized side towards the light passing through the camera lens. Where the tissue is not coated with collodion, and where paper forms one of the surfaces of the tissue, the other surface being formed of a coating or film of the
