circles as the "father of the five-gallon can"; and a fine type of the German inventor he is. The machinery for making the can has been so developed that while, in 1865, when Mr. Miller began his work under Charles Pratt, one man and a boy soldered 850 cans in a day, in 1880 three men made 8,000, and since 1893 three men have made 24,000. It is an actual fact that a tin can is made by Miller in just about the time it takes to walk from the point in the factory where the sheets of tin are unloaded to the point where the finished article is filled with oil.
And here is a nice point in combination. Not far away from the canning works, on Newtown Creek, is an oil refinery. This oil runs to the canning works, and, as the new-made cans come down by a chute from the works above, where they have just been finished, they are filled, twelve at a time, with the oil made a few miles away. The filling apparatus is admirable. As the new-made cans come down the chute they are distributed, twelve in a row, along one side of a turn-table. The turn-table is revolved, and the cans come directly under twelve measures, each holding five gallons of oil—a turn of a valve, and the cans are full. The table is turned a quarter, and while twelve more cans are filled and twelve fresh ones are distributed, four men with soldering coppers put the caps on the first set. Another quarter turn, and men stand ready to take the cans from the filler, and while they do this, twelve more are having caps put on, twelve are filling, and twelve are coming to their place from the chute. The cans are placed at once in wooden boxes standing ready, and, after a twenty-four-hour wait for discovering leaks, are nailed up and carted to a near-by door. This door opens on the river, and there at anchor by the side of the factory is a vessel chartered for South America or China or where not—waiting to receive the cans which a little more than twenty-four hours before were tin sheets
[ 240 ]
