LAWS OF ELECTROLYTIC CONDUCTION
There is no substance better fitted, under ordinary circumstances, to be the indicating body in such an instrument than water; for it is decomposed with facility when rendered a better conductor by the addition of acids or salts; its elements may in numerous cases be obtained and collected without any embarrassment from secondary action, and, being gaseous, they are in the best physical condition for separation and measurement. Water, therefore, acidulated by sulphuric acid, is the substance I shall generally refer to, although it may become expedient in peculiar cases or forms of experiment to use other bodies.
The first precaution needful in the construction of the instrument was to avoid the recombination of the evolved gases, an effect which the positive electrode has been found so capable of producing. For this purpose various forms of decomposing apparatus were used. The first consisted of straight tubes, each containing a plate and wire of platina soldered together by gold, and fixed hermetically in the glass at the closed extremity of the tube (Fig. 1). The tubes were about 8 inches long, 0.7 of an inch in diameter, and graduated. The platina plates were about an inch long, as wide as the tubes would permit, and adjusted as near to the mouths of the tubes as was consistent with the safe collection of the gases evolved. In certain cases, where it was required to evolve the elements upon as small a surface as possible, the metallic extremity, instead of being a plate, consisted of the wire bent into the form of a ring (Fig. 2). When these tubes were used as measurers, they were filled with dilute sulphuric acid, inverted in a basin of the same liquid
 | An image should appear at this position in the text. A high-res raw scan of the page is available. To use it as-is, as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|The fundamental laws of electrolytic conduction.djvu/27}}". If it needs to be edited first (e.g. cropped or rotated), you can do so by clicking on the image and following the guidance provided. [Show image]  | |
(Fig. 3), and placed in an inclined position, with their mouths near to each other, that as little decomposing
matter should intervene as possible; and also, in such a direction that the platina plates should be in vertical planes.
Another form of apparatus is that delineated (Fig. 4). The tube is bent in the middle; one end is closed; in that end is fixed
a wire and plate, a, proceeding so far downwards, that, when
15
