Page:Timber and Timber Trees, Native and Foreign.djvu/180

From Wikisource
Jump to navigation Jump to search
This page has been proofread, but needs to be validated.

160
TIMBER AND TIMBER TREES.
[CHAP.

2. Balata. This wood is of a yellowish colour, hard, heavy, strong, plain in grain, with slight heart-shake at pith or centre. It appears to be of good quality, and fit for employment in architecture in lieu of other hard wood, or it might be used for furniture. The sample logs were 13 to 18 inches square, by 20 to 24 feet in length.

3. Ebène, This wood is greenish in colour, very hard, heavy, strong, plain and even in the grain, solid, and good in quality. The sap-wood is about 1½ inch thick. It would be useful in turnery, or for any of the purposes to which the common or Ceylon Ebony is applied.

4. Ebène rouge. This wood is of a dark reddish colour, hard, heavy, strong, and straight in the grain, but is scarcely so solid at the centre as the last-mentioned wood. The dimensions of two sample logs were 12 to 14 inches square, by 14 to 17 feet in length. Both had cup-shakes at the ends. The uses for this wood would be similar to No. 3.

5. Grignon. This wood is red in colour, moderately hard, close and plain in the grain, and solid. It is of good quality, and fit to be employed in civil architecture, or in the domestic arts. The dimensions of sample logs varied from 14 to 17 inches square, and 14 to 27 feet in length.

6. Maconatari. Only one out of six pieces sent could be identified; it was dark in colour, hard, and heavy. The dimensions given for the parcel varied from 14 to 20 inches square, and 14 to 23 feet in length.

7. Paccouri Soufri. This wood is of a reddish-yellow, or brimstone colour, of a moderate degree of hardness, straight in the grain, and disposed to split freely in seasoning. Three logs were sent as samples, and each had injurious heart and cup-shakes. The