An image should appear at this position in the text. To use the entire page scan as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|UK Traffic Signs Manual - Chapter 8 - Part 1 (Traffic Safety Measures and Signs for Road). Designs 2009.pdf/100}}". Otherwise, if you are able to provide the image then please do so. For guidance, see Wikisource:Image guidelines and Help:Adding images. |
D4.10.26 Lane subject to a temporary height restriction, with the height indicated in both metric and imperial units. The roundel is 900 mm in diameter. |f combined metric and imperial units symbols are used on a sign then all prohibitory roundels on the sign must be 900 mm in diameter.
An image should appear at this position in the text. To use the entire page scan as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|UK Traffic Signs Manual - Chapter 8 - Part 1 (Traffic Safety Measures and Signs for Road). Designs 2009.pdf/100}}". Otherwise, if you are able to provide the image then please do so. For guidance, see Wikisource:Image guidelines and Help:Adding images. |
D4.10.27 Lane leading to a particular destination. For use only on signs to be placed on all-purpose roads.
An image should appear at this position in the text. To use the entire page scan as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|UK Traffic Signs Manual - Chapter 8 - Part 1 (Traffic Safety Measures and Signs for Road). Designs 2009.pdf/100}}". Otherwise, if you are able to provide the image then please do so. For guidance, see Wikisource:Image guidelines and Help:Adding images. |
D4.10.28 Lane leading to a particular destination at the junction shown. For use only on signs to be placed on motorways.
An image should appear at this position in the text. To use the entire page scan as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|UK Traffic Signs Manual - Chapter 8 - Part 1 (Traffic Safety Measures and Signs for Road). Designs 2009.pdf/100}}". Otherwise, if you are able to provide the image then please do so. For guidance, see Wikisource:Image guidelines and Help:Adding images. |
D4.10.29 Lane is closed.
An image should appear at this position in the text. To use the entire page scan as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|UK Traffic Signs Manual - Chapter 8 - Part 1 (Traffic Safety Measures and Signs for Road). Designs 2009.pdf/100}}". Otherwise, if you are able to provide the image then please do so. For guidance, see Wikisource:Image guidelines and Help:Adding images. |
D4.10.30 Traffic is moving in the opposite direction to traffic in the other lanes which are segregated by traffic cylinders; not for use with buffer lanes or vehicle separation barriers.
WIDE LOADS
An image should appear at this position in the text. To use the entire page scan as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|UK Traffic Signs Manual - Chapter 8 - Part 1 (Traffic Safety Measures and Signs for Road). Designs 2009.pdf/100}}". Otherwise, if you are able to provide the image then please do so. For guidance, see Wikisource:Image guidelines and Help:Adding images. |
D4.10.31 On dual carriageway roads, and at other locations as appropriate, vehicles carrying wide loads may require special consideration at road works.
D4.10.32 Signs to diagram 7292 should be erected to instruct drivers of wide loads on action to be taken before reaching road works
ahead. These should be sited on the near side verge at 1 km and 2 km upstream of the last carriageway exit prior to the works from which there is a suitable wide loads diversion route.
99