There was a problem when proofreading this page.
SINGLE CARRIAGEWAY ROADS
Plan SC5: "STOP/GO" signs on a two-lane single carriageway road
 | An image should appear at this position in the text. To use the entire page scan as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|UK Traffic Signs Manual - Chapter 8 - Part 1 (Traffic Safety Measures and Signs for Road). Designs 2009.pdf/131}}". Otherwise, if you are able to provide the image then please do so. For guidance, see Wikisource:Image guidelines and Help:Adding images. |  |
NOTES:
- This sign should be used if works consist of surface dressing. The signs should be placed far enough in advance of the loose chippings to allow drivers to slow down and retained as long as the loose chippings persist; see paragraph D3.18.7.
- A distance plate to diagram 572 is required for roads with a permanent speed limit of 50mph or more.
- On roads with a permanent speed limit of 50 mph or more a distance is required on the diagram 518 plate.
- Refer to Table 5.3 in Section D5.4 for dimensions of D and E.
130
