There was a problem when proofreading this page.
SINGLE CARRIAGEWAY ROADS
Plan 5C8: Portable traffic signals on a three-lane single carriageway road
An image should appear at this position in the text. To use the entire page scan as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|UK Traffic Signs Manual - Chapter 8 - Part 1 (Traffic Safety Measures and Signs for Road). Designs 2009.pdf/138}}". Otherwise, if you are able to provide the image then please do so. For guidance, see Wikisource:Image guidelines and Help:Adding images. |
NOTES:
- Where overtaking is permitted in both directions a sign to 7206 should be erected on each approach. In this case all approach signs should be located at D/3 spacing.
- Where drivers would be required to cross continuous white lines in the lane changeover positions these should be masked or removed.
- Refer to Table 5.6 in Section D5.11 for the lengths of guide islands.
- Refer to Table 5.3 in Section D5.4 for the recommended range of distances D and E.
- A distance plate to diagram 572 is required for roads with a permanent speed limit of 50mph or more.
137