A5 APPENDIX – LIST OF PLANS
Plan number | Plan title | Section |
---|---|---|
Plan SC7 | Portable traffic signals on a two-lane single carriageway road | D5.10 |
Plan SC8 | Portable traffic signals on a three-lane single carriageway road | D5.10 |
Plan CH1 | Use of chicanes to reduce traffic speeds to 10 mph | D5.12 |
Plan SC9 | Road works at a crossroads junction | D5.14 |
Plan SC10 | Road works at a T junction | D5.14 |
Plan SC11 | Road works at a T junction – traffic control by means of portable traffic signals | D5.14 |
Plan SC12 | Road works at a crossroads junction with traffic signals | D5.15 |
Plan SC13 | Road works at a roundabout | D5.16 |
Plan SC14 | Road works near a level crossing on a single carriageway road with the footway not obstructed | D5.17 |
Plan SC15 | Road works near a level crossing on a single carriageway road with the footway obstructed | D5.17 |
Plan DC1 | Dual carriageway road, hard shoulder closure only | D6.10 |
Plan DZA1 | Approach zone for a dual carriageway road with a permanent speed limit of 40 mph or less | D6.15 |
Plan DZA2 | Approach zone for a dual carriageway road with a permanent speed limit of 50 mph or 60 mph | D6.15 |
Plan DZA3 | Approach zone for a dual carriageway road for which the national speed limit applies, where queuing is expected | D6.15 |
Plan DZB1 | Entry taper for a dual carriageway road with a permanent speed limit of 40 mph or less | D6.16 |
Plan DZB2 | Entry taper for a dual carriageway road with a permanent speed limit of 50 mph or 60 mph | D6.16 |
Plan DZB3 | Entry taper for a dual carriageway road for which the national speed limit applies | D6.16 |
Plan DZB4 | Lane-change zone for a single lane closure on a dual carriageway road with a permanent speed limit of 40 mph or less | D6.16 |
Plan DZB5 | Lane-change zone for a single lane closure on a dual carriageway road with a permanent speed limit of 50 mph or 60 mph | D6.16 |
Plan DZB6 | Lane-change zone for a single lane closure on a dual carriageway road for which the national speed limit applies | D6.16 |
309