There was a problem when proofreading this page.
SINGLE VEHICLE WORKS AND INSPECTION STOPS
Plan SVW2: Single vehicle works on a single carriageway road – "STOP/GO"
An image should appear at this position in the text. To use the entire page scan as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|UK Traffic Signs Manual - Chapter 8 - Part 2- Traffic Safety Measures and Signs for Road Works and Temporary Situations) - Operations 2009.pdf/95}}". Otherwise, if you are able to provide the image then please do so. For guidance, see Wikisource:Image guidelines and Help:Adding images. |
NOTES:
- Alternative "STOP/GO" operative location dependant upon carriageway alignment and visibility.
- Use of the sign to diagram 610 on the front of the working vehicle is optional. It may only be used on roads with a maximum speed limit of 30 mph or less (see regulation 14).
- This sign is to be repeated at approximately 400 m intervals. Additional signs may be required to suit the carriageway alignment and at junctions. The supplementary plate to sign diagram 7001 (diagram 7001.1) may also show a distance.
- The sign to diagram 610 may only be used on roads with a maximum speed limit of 30 mph or less (see regulation 14 and paragraph O8.1.6).
- An authorised vehicle mounted small light arrow sign may be used in place of signs to diagram 610 and 7403 (see paragraph O8.1.8).
- On roads with a speed limit of 40 mph or more, subject to a risk assessment, consideration should be given to fitting a LMCC and/or a sign to diagram 7403 on the working vehicle. If neither are provided an escort vehicle shall be employed. See paragraphs O8.1.5 and O8.1.6.
- Keys to the plan are given in Tables A1.4 and A1.5 of Appendix 1.
93