PUBLIC LAW 102-486—OCT. 24, 1992 106 STAT. 2821 "(G) The term 'urinal' has the meaning given such term in ASME A112.19.2M-1990, except such term does not include fixtures designed for installation in prisons. "(H) The terms *blowout*, 'flushometer tank', low consumption', and 'flushometer valve' have the meaning given such terms in ASME A112.19.2M-1990. . (c) COVERAGE.— Section 322(a) of such Act (42 U.S.C. 6292(a)) is amended— (1) by redesignating paragraph (14) as paragraph (19); and (2) by inserting after paragraph (13) the following new paragraphs: "(14) General service fluorescent lamps and incandescent reflector lamps. "(15) Showerheads, except safety shower showerheads. "(16) Faucets. "(17) Water closets. "(18) Urinals.". (d) TEST PROCEDURES. —Section 323 of such Act (42 U.S.C. 6293) is amended— (1) in subsection (b)— (A) in paragraph (3), by inserting after "energy use," the following "water use (in the case of showerheads, faucets, water closets and urinals),"; (B) in paragraph (4)— (i) by inserting "or, in the case of showerheads, faucets, water closets, or urinals, water use" after "energy use"; (ii) by inserting after "such cycle" the following: ", or in the case of showerheads, faucets, water closets, or urinals, representative average unit costs of water and wastewater treatment service resulting from the operation of such products during such cycle"; and (iii) by inserting ", water, and wastewater treatment" before the period at the end of the second sentence; and (C) by adding at the end the following new paragraphs: "(6) With respect to fluorescent lamps and incandescent reflector lamps to which standards are applicable under subsection (i) of section 325, the Secretary shall prescribe test procedures, to be carried out by accredited test laboratories, that take into consideration the applicable lES or ANSI standard. "(7)(A) Test procedures for showerheads and faucets to which standards are applicable under subsection (j) of section 325 shall be the test procedures specified in ASME A112.18.1M-1989 for such products. "(B) If the test procedure requirements of ASME Al 12.18.IM- 1989 are revised at any time and approved by ANSI, the Secretary shall amend the test procedures established by subparagraph (A) to conform to such revised ASME/ANSI requirements unless the Secretary determines, by rule, that to do so would not meet the requirements of paragraph (3). "(8)(A) Test procedures for water closets and urinals to which standards are applicable under subsection (k) of section 325 shall be the test procedures specified in ASME A112.19.6-1990 for such products.
�
