PUBLIC LAW 103-337—OCT. 5, 1994 108 STAT. 2817 in such contracts through the use of procedures other than competitive procedures; and "(B) the cumulative amount of such contracts received during that period by each such college and university. "(2) Each report under paragraph (1) shall cover the preceding calendar year and shall be submitted not later than February 1 of the year after the year covered by the report.". SEC. 814. CONSOLIDATION AND REVISION OF LIMITATIONS ON PROCUREMENT OF GOODS OTHER THAN AMERICAN GOODS. The text of section 2534 of title 10, United States Code, is amended to read as follows: " (a) LIMITATION ON CERTAIN PROCUREMENTS. —The Secretary of Defense may procure any of the following items only if the manufacturer of the item satisfies the requirements of subsection (b): "(1) BUSES. —Multipassenger motor vehicles (buses). "(2) CHEMICAL WEAPONS ANTIDOTE.— Chemical weapons antidote contained in automatic injectors (and components for such injectors). "(3) AIR CIRCUIT BREAKERS.—Air circuit breakers for naval vessels. "(4) VALVES AND MACHINE TOOLS.—Items in the following categories: "(A) Powered and non-powered valves in Federal Supply Classes 4810 and 4820 USC d in piping for naval surface ships and submarines. "(B) Machine tools in the Federal Supply Classes for metal-working machinery numbered 3405, 3408, 3410 through 3419, 3426, 3433, 3438, 3441 through 3443, 3445, 3446, 3448, 3449, 3460, and 3461. " (5) BALL BEARINGS AND ROLLER BEARINGS. —Ball bearings and roller bearings, in accordance with subpart 225.71 of part 225 of the Defense Federal Acquisition Regulation Supplement, as in effect on October 23, 1992. "(b) MANUFACTURER IN THE NATIONAL TECHNOLOGY AND INDUS- TRIAL BASE.— "(1) GENERAL REQUIREMENT.— A manufacturer meets the requirements of this subsection if the manufacturer is part of the national technology and industrial base. "(2) MANUFACTURERS OF CHEMICAL WEAPONS ANTIDOTE.— In the case of a procurement of chemical weapons antidote referred to in subsection (a)(2), a manufacturer meets the requirements of this subsection only if the manufacturer— "(A) meets the requirement set forth in paragraph (1); "(B) is an existing producer under the industrial preparedness program at the time the contract is awarded; "(C) has received all required regulatory approvals; and "(D) when the contract for the procurement is awsirded, has in existence in the national technology and industrial base the plant, equipment, and personnel necessary to perform the contract. "(c) APPLICABILITY TO CERTAIN ITEMS. —
�
