PROCLAMATION 6641—DEC. 15, 1993 108 STAT. 5217 Annex I (con.) -80 - (£) maintenance/sealing asseniblies, Incorporating more than one of the following: vacuum unit; ink jet covering unit; sealing unit; purging unit; (g) paper handling assemblies, incorporating more than one of the following: paper transport belt; roller; print bar; carriage; gripper roller; paper storage unit; exit tray; (h) thermal transfer imaging assemblies, incorporating more than one of the following: thermal print head; cleaning unit; supply or take-up roller; (i) ionographic imaging assemblies, incorporating more than one of the following: ion generation and emitting unit; air assist unit; printed circuit assembly; charge receptor belt or cylinder; toner receptacle unit; toner distribution unit; developer receptacle and distribution unit; developing vinit; charge/discharge unit; cleaning unit; or (J) combinations of the above specified assemblies. Chapter rule 3: For the purposes of the subdivisions pertaining to this chapter, whenever the subdivision designation is underscored, the provisions of subdivision (d) of this note may apply to goods for use in a motor vehicle of chapter 87. 1.(A) A change to subheadings 8401.10 through 8401.30 from any other heading; or (B) A change to subheadings 8401.10 through 8401.30 from subheading 8401.40, whether or not there is also a change from any other heading, provided there is a regional value content of not less than: (1) 60 percent where the transaction value method is used, or (2) SO percent where the net cost method is used. 2. A change to subheading 8401.40 from any other heading. 3.(A) A change to subheadings 8402.11 through 8402.20 from any other heading; or (B) A change to subheadings 8402.11 through 8402.20 from subheading 8402.90, whether or not there is also a change from any other heading, provided there is a regional value content of not less than: (1) 60 percent where the transaction value method is used, or (2) SO percent where the net cost method is used.
�
