3776 Scbedule II-Collt.l . RECIPROCAL TRADF.J--.'nVl~DEN. MAY 25, 1935. Tariff Act of 1930 paragraph Description of Articles 301 Granular or sponge iron 302 (k) Ferrochrome or ferrochromium containing 3 per centum or more of carbon 302 (k) 303 304 305 (1) 315 316 (a) 316 (a) Ferrochrome or fcrrochromium containing less than 3 per centum of carbon, and chrome metal or chromium metal Muck bars, pieces thereof except crop ends, bar iron, and round iron in coils or rods, iron in slabs, blooms, loops, or other forms less fin- ished than iron in bars and more advanced than pig iron, exc.ept castings; all the foregoing Valued above 2}-2 and not above 3~ cents per pound Valued above 3% and not above 5 cents per pound Valued above 5 cents per pound Steel ingots, cogged ingots, blooms and slabs, by whatever process made; die blocks or blanks; billets and bars, whether solid or hollow; shafting; pressed, sheared, or stamped shapes, not advanced in value or condition by any process or operation subsequent to the process of stamping; hammer molds or swaged steel; gun-barrel molds not in bars; concrete reinforcement bars; all descriptions and shapes of dry sand, loam, or iron molded steel cast- ings; sheets and plates and steel not specially provided for; all the foregoing valued above 2~ and not above 8 cents per pound The additional duty to be levied, collected, and paid under paragraph 305 (1) on any steel or iron in the materials and articles enu- merated or described in paragraphR 303, 304, 307, 308, 312, 313, 315, 316, 317, 318, 319, 322, 323, 324, 327 and 328 and valued at more than 3}'2 but not more than 8 eents per pound shall be Wire rods: Rivet, screw, fence, and other iron or steel wire rods, whether round, oval, or square, or in any other shape, nail rods and flat rods up to six inches in width ready to be drawn or rolled into wire or strips, all the foregoing in coils or otherwise: Valued over 2~ and not over 4 cents per pound Valued over 4 cents per pound Round iron or steel wire, valued above 6 cents per pound All flat wires and all steel in strips not exceedbg sixteen inches in width, whether in long or short lengths, in coils or otherwise, and whether rolled or drawn through dies or rolls, or otherwise produced: Not thicker than Ytoo of one inch Thicker than Ytoo and not thicker than %00 of one inch Rates of Duty S1.25 per ton. 1.25¢ per lb. on the chromium contained therein. 25% ad val. O.5¢ per lb. 0.8¢ per lb. 1.0t per lb. 20% ad val. 4% ad val. 0.3¢ per lb. O.6¢ per lb. 20% ad val. 15% ad val. 20% ari val.
