Page:Vincent's systems of cutting all kinds of tailor-made garments.djvu/154

From Wikisource
Jump to navigation Jump to search
This page has been proofread, but needs to be validated.
138
VINCENT’S SYSTEMS OF

THE RAGLAN.

Diagram 251.

The special feature of the Raglan is the shape of the shoulder, and its general looseness in the body.

I have already described how to give looseness in the body, so will confine my comments to the shoulders.

The dotted outlines show the ordinary Chesterfield shape.

From this reduce ½ inch at 3, and about 1½ at 8, curving it down to bottom of scye as diagram.

F to A about 1 inch, and from this curve down to front of scye, as shown.

RAGLAN SLEEVE.

Diagram 252.

Draft sleeve as for ordinary Chester.

Square up from 4¾ to A.

Make it the same width as the shoulder, to 8.

A to D, 1 inch and shape as shown.

Make 4¾ a pivot, and sweep from A to B, making it about ⅛ breast.

B to C, ½ inch more than F. A.

Measure up from L to A of the forepart and make 5½ to C a trifle longer, so as to provide a little for fulling on.

See that curve of B, C harmonises with A of forepart.

Sometimes the seam is continued down topside to cuff, this is a matter of taste.

FLY FRONT FROCK.

Diagram 253.

The Frock Overcoat promises to be one of the most popular styles of the immediate future.

The Frock Overcoat has been a favourite from time to time.

I therefore give a diagram and description of cutting it.

All the points are found in the same way as described for the Chesterfield, even to the adding on of 2 inches to the front.

The principal variation is in the position of the seams.

The back is found by measuring in from 171, 4 inch.

The width of back scye and back waist are made about 21 inches.

The sideseam is hollowed ½ inch from angle line.

The waist is suppressed 1½. between back and side body, and 1 inch between sidebody and forepart.

The waist seam is hollowed up 1 inch.

The skirt is formed by dropping down from B 3 inches, and squaring by 3 A, going down 9 inches and out 1, as for Frock Coats.

Get run of front by marking down 3 inches, and squaring by this point and B.