 | An image should appear at this position in the text. To use the entire page scan as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|Vincent's systems of cutting all kinds of tailor-made garments.djvu/41}}". Otherwise, if you are able to provide the image then please do so. For guidance, see Wikisource:Image guidelines and Help:Adding images. |  |
FOREPART.
Diagram 38.
0 to 8, depth of scye to waist, agreeing with back.
8 to 1, 1 inch always.
Hollow sideseam as shown. 0 to 9¾, one-fourth breast plus ¾.
1 to 9, one-fourth waist plus ¾.
Find front of scye by making point 2¼ always 2¼ inches.
Or ½ less than across chest measure back from 9¾.
Place Registered Square with the angle at 2¼, and the angle line dropped in front ¼ inch, as shown and mark up to F the front shoulder measure less ¼ and minus width of back neck.
Or sweep by this quantity first from 2¼, then add ¾; and sweep again from 9¾.
Locate neck point F where the two segments intersect each other.
Obtain point D by sweeping from 2¼ by the over-shoulder measure less ¼ inch and minus ½, W, of back.
Width of shoulder ¼ less than back.
F to V and V to I, one-twelfth breast less ½ inch.
Measure off opening from F to breast line less width of tack neck.
Ditto full length to O plus ¾.
Square B, O by F, B.
Add button stand ¾ and complete draft in the style desired after the manner of succeeding diagrams.
