Page:Cassells' Carpentry and Joinery.djvu/33

From Wikisource
Jump to navigation Jump to search
This page has been validated.
HAND TOOLS AND APPLIANCES.
17


calculated to withstand the thrusting stress without unduly increasing the mass of metal. The teeth are bent to right and left alternately — this being known as the set

Fig. 81. — Compass Saw. Fig. 82.— Pad Saw.
Fig. 81. — Compass Saw. Fig. 82.— Pad Saw.

Fig. 81. — Compass Saw. Fig. 82.— Pad Saw.

— and their outline is angular. The teeth are so sharpened that their outer points enter the wood first, the fibre being divided by a gradually incisive kind of action. Six teeth to the inch are suitable for a hand saw used for cutting rough stuff, trimming joists, cutting rafters, etc. For joiners' work the panel saw, 2 in. or 3 in. shorter and much narrower, thinner, and lighter than the hand saw, is preferable. The rip saw has a blade about 28 in. long, and its teeth, three to the inch, are sharpened square across the blade and set very much forward; this saw is used for cutting along the grain, known as ripping. The tenon saw (Fig. 79) is used for cutting shoulders and in all cases where a clean cut is essential; it obtains this by means of its fine teeth. The dovetail saw is a small tenon saw, it being 6 in. or 8 in. long, whereas the ordinary tenon saw is 12 in. or 14 in. long.

Fig. 83. Fig. 84
Fig. 83. Fig. 84

Figs. 83 and 84. — Improved Saw Vice.

The bow saw, known also as the turning saw or frame saw (Fig. 80), cuts out curved work with or across the grain, the compass, turning, or lock saw (Fig. 81) being used for a similar purpose, and in cases where a large saw could not be employed. A keyhole or pad saw (Fig. 82) is used for small internal curved work.

Appliances for Sharpening Saws.—For holding a hand saw during the process of sharpening, a saw vice (Figs. 83 and 84) is used, there being many designs to choose from. For sharpening English hand saws, the triangular file (Fig. 85) is commonly

Fig. 85.— Triangular Saw File.
Fig. 85.— Triangular Saw File.

Fig. 85.— Triangular Saw File.

used; its size varies with that of the saw for which it is required. Special shapes of files are necessary for sharpening American cross-cut and rip saws. Saw