Page:Collected Physical Papers.djvu/100

From Wikisource
Jump to navigation Jump to search
This page has been validated.
80
ELECTRO-MAGNETIC RADIATION

variation due to the make and break of the primary of the Ruhmkorff's coil, disturbs the receiver. This difficulty is removed by making the inner box of soft iron which acts as a magnetic screen.

A few words may here be said about the necessary conditions to be kept in view in making an electric wave apparatus an instrument of precision. If one merely wishes to produce response in a receiver at a distance, the more energetic the vibration is, the more likely it is to overcome obstacles. The waves may with advantage be of large size, as they possess very great penetrative power. The surface or the depth of the sensitive layer in the receiver may be extended, for if one part of it does not respond another part will. But for electro-optical investigations the conditions to be fulfilled are quite different. Too great an intensity of radiation makes it almost impossible to prevent the disturbance due to stray radiation. As the waves are invisible, it is difficult to know through what unguarded points they are escaping. They may be reflected by the walls of the room or even by the person of the experimenter, and falling on the receiver disturb it.

The radiation falling on any portion of the receiving circuit, the leading wires or the galvanometer, disturbs the sensitive receiver. It is extremely difficult to shield the receiving circuit from the disturbing action of stray radiation. All difficulties were, however, successfully removed by the use of short electric waves. With these, it is not at all necessary to take special precautions to shield either the galvanometer or the leading wires, the sensitive layer in the receiver alone being affected by the radiation. The bare leading wires may be exposed in close proximity to