Page:De Vinne, Invention of Printing (1876).djvu/316

From Wikisource
Jump to navigation Jump to search
This page has been validated.
306
THE WORKS OF AN UNKNOWN PRINTER.

could not be regulated. This exposed position was at the ends of the long lines; the types that projected beyond their fellows received the hardest impression, and the printer knew no better method of shielding them than by the insertion of worn types at the ends of the shorter lines above and below.[1]

This expedient was insufficient. On the margins of many copies of the Speculum can be detected (for the grain of wood is unmistakable) the marks of impressions against wood. It seems that the pages of types were fastened in a mortised block of wood of the same height as the types. This block of wood not only served as a chase to hold the types, but as a bearer to shield the types from uneven impression. It steadied the descent of the platen, and diffused the impression equally over the entire surface. These bearers shielded the types from undue impression, but they made a new difficulty, for they were of the same height as the types. The inking of a form so constructed must have blackened with equal impartiality the types of the text, the worn types used as bearers, and the wooden chase. To lay a sheet of white paper over such a form would smear and blacken it at the ends of short lines and in the margins where no color was required. It became necessary to put a mask over these bearers, so that the ink on the bearers would not be transferred to the paper.

This mask was substantially the same contrivance which modern printers call the frisket. It shielded the white sheet from contact with ink where ink was not required, but could not shield it from impression. It really strengthened and deepened the impression, producing the embossed letters in the short lines and the marks of wood in the margins. On

  1. To protect types in places similarly exposed, stereotypers insert at the extreme ends of short lines types of flat face expressly designed for this object, which are usually known as guards. When the plates have been made perfect in other points, the guards are no longer needed, and are cut away. When books were printed on hand presses during the first half of this century, pressmen sometimes pasted on or tacked on thin strips of wood around the forms of types to shield the ends of lines from injury. It is a strange surprise to encounter this modern method of protecting types from injury in one of the earliest books.