A greater derangement would bring the roller to the crest of the curve, on which it would rest in instable equilibrium; and the machine would either become locked, or the roller would throw it as before into its true position.
In other instances a similar object is attained by a solid cone being pressed into a conical seat; the position of the axis of the cone and that of its seat being necessarily invariable, however the cone may wear: and the action of the cone upon the seat being such, that it cannot rest in any position except that in which the axis of the cone coincides with the axis of its seat.
Having thus attempted to convey a notion, however inadequate, of the calculating section of the machinery, we shall proceed to offer some explanation of the means whereby it is enabled, to print its calculations in such a manner as to preclude the possibility of error in any individual printed copy.
On the axle of each of the wheels which express the calculated number of the table T, there is fixed a solid piece of metal, formed into a curve, not unlike the wheel in a common clock, which is called the snail. This curved surface acts against the arm of a lever, so as to raise that arm to a higher or lower point according to the position of the dial with which the snail is connected, Without entering into a more minute description, it will be easily understood that the snail may be so formed that the arm of the lever shall be raised to ten different elevations, corresponding to the ten figures of the dial which may be brought under the index. The opposite arm of the lever here described puts in motion a solid arch, or sector, which carries ten punches: each punch bearing on its face a raised character of a figure, and the ten punchy bearing the ten characters, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0. It will be apparent from what has been just stated, that this type sector (as it is called) will receive ten different attitudes, corresponding to the ten figures which may successively be brought under the index of the dial-plate. At a point over which the type sector is thus moved, and immediately under a point through which it plays, is placed a frame, in which is fixed a plate of copper. Immediately over a certain point through which the type sector moves, is likewise placed a bent lever, which, being straightened, is forcibly pressed upon the punch which has been brought under it. If the type sector be moved, so as to bring under the bent lever one of the steel punches above mentioned, and be held in that position for a certain time, the bent lever, being straightened, acts upon the steel punch, and drives it against the face of the copper beneath, and thus causes a sunken impression of the character upon the punch to be left upon the copper. If the copper be now shifted slightly in its position, and the type sector be also shifted
