ELECTRO-MET ALL UKGY 115 modification of Daniell s cell, and on removing the deposited metal he was struck with the faithful copy of the coin which it presented, though of course the copy was in intaglio instead of relief. Yet even this observation was allowed to remain unproductive until another accident called his attention to it afresh. Some varnish having been spilt upon the copper element of a Daniell s cell, it was found that no copper was thrown down upon the sur face thus protected by a non-conducting medium ; hence it was obvious that the experimentalist had it in his power to direct the deposition of the metal as he pleased; and this led Mr Spencer to prosecute a series of experiments by which he was at length able to obtain exact copies of medals, engraved copper plates, and similar objects. It should be mentioned that between the date on which he announced his paper and the date on which it was actually read, Mr C. J. Jordan, a printer, described experiments which he had made in the preceding year very similar to those of Spencer. This announcement was made in a letter published in the London Mechanics Magazine for June 8, 1839. It thus appears that three experimentalists were close upon the same track about the same time, but it is generally admitted that among these competitors Mr Spencer has ths merit of having been the earliest to bring his process to perfection, and to demonstrate its practical value. Soon after the appearance of Mr Spencer s paper, it became a fashionable amusement to copy coins, seals, and medals by the new process. These copies in metal are termed electrotypes. The apparatus employed in the early days of the art, and which may still be conveniently used for small electrotypes, is similar in principle to a single Daniell s cell. It usually consists of a glazed earthenware jar containing a solution of sulphate of copper, which is kept saturated by having crystals of the salt lodged on a perforated shelf, so that they dip just below the surface of the solution. A smaller porous cylinder, containing very dilute sulphuric acid, in which a rod of amalgamated zinc is placed, stands in the jar, and is therefore surrounded by the solution of sulphate of copper. The object to be copied is attached by a copper wire to the zinc, and is immersed in the cupric solution. It thus forms the negative element of a galvanic couple, and a current of electricity passes from the zinc through the two liquids and the intervening porous partition to the object, and thence back to the zinc through the wire, thus completing the circuit. During this action, the zinc dissolves, and sulphate of zinc is formed; at the same time the copper solution is decomposed, and its copper deposited upon the metallic surface of the object to be coated, the solution thus becoming weaker as it loses its copper, but having its strength renewed by con sumption of fresh crystals of blue vitriol. To avoid the complete incrustation of the metal or other object, one siie of it is coated with varnish or some other protective medium, so that the deposition of copper takes place only on such parts as are exposed. The deposit may be easily removed when sufficiently thick, and will be found to present an exact counterpart of the original, every raised line being represented by a corresponding depression. To obtain a facsimile of the original it is therefore necessary to treat this matrix in the same way that the original was treated, and this second deposit will of course present the natural relief. Another method consists in taking a mould of the original soin iu fusible metal, and then depositing copper upon this die, so as to obtain at once a direct copy of the original. Considerable extension was given to the process by a discovery, apparently trivial, which was first announced by Mr Murray at a meeting of the Royal Institution in January 1840. He found tbat an electro-deposit of metal could be formed upon almost any material if its surface was rendered a conductor of electricity by a thin coating of graphite or " black-lead." Instead, therefore, of copyiug a coin in fusible metal, or indeed in any metallic medium, it is simply necessary to take a cast in plaster-of-Paris, wax, gutta-percha, or other convenient material, and then to coat the surface with finely-powdered black-lead, applied with a camel-hair pencil. Medals in high relief, with much undercutting, or busts and statuettes, may be copied in electrotype by first taking moulds in a mixture of glue and treacle, which forms an elastic composition capable of stretching sufficiently to permit of removal from the object, but afterwards regaining its original shape. About the same time that Murray suggested the use of black-lead, Mr Mason made a great step in the art by introducing the use of a separate battery. Daniell s cell, in consequence of its regular and constant action, is the favourite form of electric generator. The copper cylinder of this arrangement is connected with a plate of copper placed in a trough containing a solution of sulphate of copper, to which a small quantity of free sulphuric acid is commonly added ; whilst the zinc rod of the cell is con nected with the objects on which the copper is to be deposited, and which are also suspended in the bath of cupric solution. The current enters the bath at the surface of the copper plate, which is the anode or positive pole of the combination, and passes through the solution to the suspended medals which constitute the cathode or negative pole. A? fast as the copper is thrown down upon these objects, and the solution is therefore impoverished, a fresh supply is obtained by solution of the copper plate ; this copper is consequently dissolved just as quickly as the electrotypes are produced, and no supply of crystals is needed, as in the case of the Daniell cell. The great advantage of using a separate battery is that several objects may be coated at the same time, since it is only necessary to attach them to a metal rod in connection with the battery. Almost any form of galvanic arrangement may be employed by the metallurgist as a generator of electricity. But as the exciting liquid in a battery needs to be replenished from time to time, and as the zinc plates also wear out, its use is attended with more or less incon venience in the workshop, and the electro-metallurgist has therefore turned his attention to other sources of electricity. Indeed, as far back as 1842, when the art was but in its infancy, a patent was taken out by Mr J. S. Woolwich for the use of a magneto-electrical apparatus ; and of late years powerful machines in which electricity is excited by means of magnetism have been introduced into electro-metallurgical establishments. When a bar of soft iron, surrounded by a coil of insulated copper wire, is rotated between the poles of a magnet, a current of electricity is induced in the coil at every magnetization and demagnetization of the core. By means of a commutator, these alternating currents in opposite directions may be converted into a constant stream of electricity, available for the deposition of metals by electrolysis. The armatures are rotated by mechanical means, such as the use of a steam-engine, and hence the electricity is ultimately produced by conversion of mechanical work. In the machine constructed by Mr Wilde, which has been largely employed by electro-metallurgists, a small magneto-electric apparatus, with permanent magnet, is employed to excite the electromagnet of a much larger machine. The induced current of the second machine is stronger than that of the first in proportion as the electro magnet is more powerful than the permanent magnet ; this second current may then be used to excite another electro magnet, and hence by means of this principle of accumula
tion, currents of great energy may be obtained. The