Lesson 60
THE DART SLEEVE.
LESSON 60.
This sleeve shall be carried out from, a very full top sleeve, to begin this sleeve we first prepare a very large top sleeve as shown on diagram. How to cut a sleeve with all sizes of fullness. For this sleeve take the largest sleeve from diagram mentioned, this top sleeve shall be curved at the outside from C to D as shown on the diagram, now mark the spaces on top of the top sleeve where small darts shall take place as shown on diagram, from A, F, G, H, I, J, & E.
The deepness of these darts shall be 3 inches only amount taken out for these darts shall be considered as to the size of the arm-hole wanted.
Be very careful to raise up the small amount on both sides of the dart as shown on the diagram. This completes the sleeve with the darts on top.
