124 STAT. 1364 PUBLIC LAW 111–199—JULY 7, 2010 ‘‘(i) quarterly tests shall be conducted pursuant to test method ASTM E–1333–96 (2002) or, subject to subpara- graph (B), ASTM D–6007–02; and ‘‘(ii) quality control tests shall be conducted pursuant to ASTM D–6007–02, ASTM D–5582, or such other test methods as may be established by the Administrator through rulemaking. ‘‘(B) Test results obtained under subparagraph (A)(i) or (ii) by any test method other than ASTM E–1333–96 (2002) must include a showing of equivalence by means established by the Administrator through rulemaking. ‘‘(C) Except where otherwise specified, the Administrator shall establish through rulemaking the number and frequency of tests required to demonstrate compliance with the emission standards. ‘‘(4) APPLICABILITY.—The formaldehyde emission standard referred to in paragraph (1) shall apply regardless of whether an applicable hardwood plywood, medium-density fiberboard, or particleboard is— ‘‘(A) in the form of an unfinished panel; or ‘‘(B) incorporated into a finished good. ‘‘(c) EXEMPTIONS.—The formaldehyde emission standard referred to in subsection (b)(1) shall not apply to— ‘‘(1) hardboard; ‘‘(2) structural plywood, as specified in the standard entitled ‘Voluntary Product Standard—Structural Plywood’ and num- bered PS 1–07; ‘‘(3) structural panels, as specified in the standard entitled ‘Voluntary Product Standard—Performance Standard for Wood- Based Structural-Use Panels’ and numbered PS 2–04; ‘‘(4) structural composite lumber, as specified in the standard entitled ‘Standard Specification for Evaluation of Structural Composite Lumber Products’ and numbered ASTM D 5456–06; ‘‘(5) oriented strand board; ‘‘(6) glued laminated lumber, as specified in the standard entitled ‘Structural Glued Laminated Timber’ and numbered ANSI A190.1–2002; ‘‘(7) prefabricated wood I-joists, as specified in the standard entitled ‘Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists’ and num- bered ASTM D 5055–05; ‘‘(8) finger-jointed lumber; ‘‘(9) wood packaging (including pallets, crates, spools, and dunnage); ‘‘(10) composite wood products used inside a new— ‘‘(A) vehicle (other than a recreational vehicle) con- structed entirely from new parts that has never been— ‘‘(i) the subject of a retail sale; or ‘‘(ii) registered with the appropriate State agency or authority responsible for motor vehicles or with any foreign state, province, or country; ‘‘(B) rail car; ‘‘(C) boat; ‘‘(D) aerospace craft; or ‘‘(E) aircraft; Regulations.
